The Specification of SDS-07550 0.75mm Diameter 50mm Length Glued Hooked End Steel Fiber
Name | SD-07550 |
Type | Glued |
Diameter | 0.75mm |
Length | 50mm |
L/D(length/diameter) | 66 |
Tensile strength | >1150Mpa |
Application | Mold concrete |
The Advantages of SDS-07550 0.75mm Diameter 50mm Length Hooked End Steel Fiber
Easy to disperse, non-clustering, uniform and large distribution;
Greatly improve the toughness of concrete;
Improve the tensile strength of concrete;
Saving engineering quantity and shorten construction period;
The glued steel fiber is widely used in industrial floors, high way, tunnel, industrial floors and etc.
USER'S GUIDANCE
Dosage: depend on the application and minimum dosage is 20kg/㎥-70kg/㎥
Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.
Put the uniformly mixed fiber concrete into the conveyor and transport.
Concrete pouring and laying should be compacted.
The Safety & Packaging of SDS-07550 0.75mm Diameter 50mm Length Glued Hooked End Steel Fiber
Star Smith is a professional steel fiber manufacturer that can offer a wide range of hooked end steel fiber that meets different needs.
Packaging: 20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet, 24tons per 20'container.
And the pallets should be waterproof, don't stack pallets on top of each other.
Gloves and eye protection should be used when adding the steel fibers.